Ubiquiti UniFi airCube ISP AP vs Ubiquiti UniFi EdgePoint S16 Karşılaştırma

En fazla 4 ürün. Ürün kartlarından veya ürün sayfasından «Karşılaştır» ile ekleyin.

Kablolu

Ubiquiti EdgeMAX airCube ISP AP

ACB-ISP

Fiyat ve stok sorunuz

Stokta

Ürünü incele Listeden çıkar

Kablolu

Ubiquiti EdgeMAX EdgePoint S16

EP-S16

Fiyat ve stok sorunuz

Stokta

Ürünü incele Listeden çıkar

Özellik karşılaştırması

Sadece farkları göster

Özellik	Ubiquiti EdgeMAX airCube ISP AP	Ubiquiti EdgeMAX EdgePoint S16
Kategori	Kablolu	Kablolu
Model	ACB-ISP	EP-S16
Fiyat	Fiyat ve stok sorunuz	Fiyat ve stok sorunuz
Stok	Stokta	Stokta
Boyutlar	87.8 x 89.5 x 89.25 mm (3.5 x 3.5 x 3.5")	Without wall-mount: 326.6 x 382.7 x 88.8 mm (12.9 x 15.1 x 3.5")With wall-mount: 326.6 x 382.7 x 105.5 mm (12.9 x 15.1 x 4.2")
Ağırlık	280 g (9.9 oz)	Without wall-mount: 3.4 kg (7.5 lb)With wall-mount: 3.8 kg (8.4 lb)
Networking interface	10/100 Fast Ethernet ports	(1) RJ45 serial port(16) 10/100/1000 RJ45 ports(2) 1/10 Gbps SFP+ ports
Management interface	EthernetWiFi	—
Power method	Micro-USB adapter (Not included)PoE 24V In on LAN port 1	—
Power supply	5V	Min. 54V / 0.8A (Excludes PoE output)
Max. power consumption	5W	40W (Excludes PoE output)
Supported power voltage	4.95–5.05V	—
PoE Out	Controllable 24V PoE Out (4, 5+, 7, 8-) on WAN port	—
Operating frequency	2.4 GHz	—
Antenna gain	4 dBi	—
Max. speeds	300 Mbps	—
Max. TX power	20 dBm	—
ESD/EMP protection	± 24 kV RJ45 interface	—
LED	Status	—
Ambient operating temperature	-10 to 50° C (14 to 122° F)	-40 to 65° C (-40 to 149° F)
Ambient operating humidity	5 to 95% noncondensing	10 to 90% noncondensing
Sertifikalar	CE, FCC, IC	CE, FCC, IC
NDAA Compliant	Yes	Yes
Enclosure material	—	Diecast aluminum alloy, UV-resistant polycarbonate
Mount	—	Pole/wall mount
Wind loading	—	153 N at 200 km/h (34 lbf at 125 mph)
Wind survivability	—	200 km/h (125 mph)
Power method*	—	(1) DC terminal block54V DC, 6A input*Self-correcting polarity protection on DC terminal block only, diode red protection on all power inputs.
Passive PoE input*	—	(2) 54V / 1.5A, 4-pair (+1, 2, 4, 5; - 3, 6, 7, 8) passive PoE, ports 1 and 2*Do NOT configure port 1 or 2 in PoE output mode if you are using PoE input power sources.
Passive PoE output	—	(4) 54V or 24V /1.4A, 4-pair (+1, 2, 4, 5; - 3, 6, 7, 8) passive PoE, ports 1 to 4(12) PoE/PoE+ or 24V/0.7A, 2-pair (+ 4, 5; - 7, 8) passive PoE, ports 5 to 16
Power monitoring	—	(1) DC terminal block, input power(2) RJ45, ports 1 and 2, PoE input or output power(14) RJ45, ports 3 to 16, PoE output power
Supported voltage range	—	42–56V DC (-48V is NOT supported)
Button	—	Factory reset
LEDs	—	System: powerRJ45 ports: speed/link/activity, PoESFP ports: speed/link/activity